Erreka CICLON CL210 Installateur-Bedienungsanleitung Seite 52

INSTALLATION

Procedure
Position the wall support and the operator
Connect the operator to the control board

Before making any electrical connections,
check the control board instructions manual.

Before carrying out any door movement,
ensure there is no person or object in the radius
of action of
mechanisms.

Ensure the earth wire of the motors is
connected to the control board earth terminal.
48
Installation Manual
the door and the
1 Choose screws which are suitable for the place of
attachment (metal, brick, wood, etc) and the weight
and effort of the operator.

Use appropriate screws.
2 Mark the points to bore in the wall.

Before marking the position of the holes, ensure
the assembly levels and positions are respected, see
"Fig. 4 Example of assembly position with slide arm
for inward opening" and "Fig. 6 Example of
assembly position for operator with articulated
arm".
3 Bore the points (1) marked.
4 Attach the operator (2) to the wall support (3) using
the screw-nut sets (4).
5 Mount the operator and support on the wall using
appropriate screws.
drive