AEG S93880KMB3 Benutzerinformation Seite 27

3.3 Switching on
1. Connect the mains plug to the power
socket.
2. If the display is off, press ON/OFF.
If DEMO appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if...".
The temperature indicators show the set
default temperature.
To select a different set
temperature refer to
"Temperature regulation".
CAUTION!
If the door remains open for
some minutes, the light will
turn off automatically. The
light is reset by closing and
opening the door itself.
3.4 Switching off
Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance
from the power disconnect
the mains plug from the
power socket.
3.5 Temperature regulation
The set temperature of the fridge may be
adjusted by pressing the temperature
button.
Default temperature:
• +5°C for the fridge
The temperature indicator shows the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
3.6 ChildLock function
To lock any possible operation through
the buttons select the ChildLock
function.
Water dispensing and the light is not
locked in this mode.
1. To switch on the function press
ChildLock for 3 seconds.
The ChildLock indicator is shown.
2. To switch off the function press
ChildLock for 3 seconds.
The ChildLock indicator goes off.
3.7 COOLMATIC function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, activate the
COOLMATIC function to chill products
more rapidly and to avoid warming other
food that is already in the refrigerator.
Press the COOLMATIC or Mode button.
The COOLMATIC indicator appears.
The COOLMATIC mode shuts off
automatically after approximately 6
hours.
To switch off the function before its
automatic end, repeat the procedure
until the COOLMATIC indicator turns off.
The function switches off by
selecting a different fridge
set temperature.
3.8 ExtraHumidity function
If you need to increase the humidity in
the refrigerator, we suggest activating
the ExtraHumidity function.
1. To switch on the function press
Mode until the corresponding icon
appears.
The ExtraHumidity indicator goes on.
2. To switch off the function press
Mode in order to select an other
function or press Mode until you can
see none of the special icons.
The ExtraHumidity indicator goes off.
3.9 Holiday function
This function allows you to keep the
refrigerator closed and empty during a
long holiday period without the
formation of a bad smell.
The fridge compartment
must be empty with Holiday
function on.
1. To switch on the function press
Mode until the corresponding icon
appears.
The Holiday indicator goes on.
ENGLISH 27