Inhaltsverzeichnis
Werbung
Before first use charge the built-in lithium-ion battery of
the mini grinder for approx. 3 – 5 hours.
Connect the power cord with
1.
the charging station and a
wall socket.
Insert the mini grinder into the
2.
charging station, only as
shown in the picture on the
right. The charging control
LED (7) turns on.
First the red charging control
LED will flash to indicate that
the battery is charged. As soon as all three LEDs
(red, yellow and green) turn on, the built-in battery is
fully charged.
Disconnect the charging station from power mains.
3.
Turning ON and OFF
Press the ON/OFF switch (9) to turn on the mini
1.
grinder.
Press the ON/OFF switch (9) again, to switch off the
2.
mini grinder.
Adjusting the Speed
Press the +button (8) to increase the speed of the
1.
motor. The more you press the +button, the higher
the speed will be. The speed can be adjusted from
8.000 – 25.000 rpm. When increasing the speed, the
Operation
19
Werbung
Inhaltsverzeichnis
