Technical Data; Scope Of Supply - Weller WCB 2 Betriebsanleitung

No blinking cursor in ready mode: Error in connection cable (5) (defective or not
connected)
3.2 Battery replacement
Push open cover to battery compartment in direction of arrow (open). Insert batteries as
shown in battery compartment. Shut housing.

4. Technical data

WCB 1: Battery 4 x 1.5V Type AA/mignon
WCB 2: Battery 4 x 1.5V Type AA/mignon
Network adapter 9V DC 100 mA (connection (6))
3.5 mm jack connection, neutral contact (inner conductor) +
5. Accessories (WCB 2 only)
005 31 190 99 Temperature sensor for jacketed thermoelement Type K ø 0.5 mm
005 31 181 99 Interface cable
005 31 184 99 Network adapter (230V/50 Hz)

6. Scope of supply

Calibration box
Batteries 4 x 1.5V
Operating instructions
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
15