BlueMarine MaxLed 160 Gebrauchsanweisung Seite 4

Instruction Manual
REMOTE CONTROL
Time/Light intensity up.
Hold for 2 seconds to turn ON the lighting.
Time/Light intensity down.
Hold for 2 seconds to turn OFF the lighting.
Changing time periods and set the correct time.
Adjusting light intensity (0-30) of the white and blue LEDs.
DISPLAY
Indication Daytime
Indication Sunrise or Sunset
Indication Dawn or Evening
Lighting off
Time
TIMER AND LIGHT INTENSITY SETTINGS
Setting the start time
, the display shows o
1 Press
time the Dawn begins (For a start time of 5 o'clock in the morning, the display will show o
2 Then press to set the duration of the Dawn Period.
Setting the duration and light intensity per time period
3 After pressing the
2 hours, 1 o2 will be shown on the display).
o
to set the light intensity throughout this period. 1 A will appear on the display for the white LEDS and 1
4 Press
for the blue LEDs. The light intensity is indicated by the last two digits, between oo to 3o. Increase or decrease the
level of light intensity by pressing
intensity of both colours to create a Dawn-light.
5 Then press to save the setting and to set the next period.
6 Repeat the previous steps until you have set all periods of time.
4
oo. Press
/ to set the time the lighting will be turned on, this is going to be the
o
, the display will show 1
o
/ . By pressing on
Time settings
Indicates Dawn Period
oo. Press
/ to set the duration of the Dawn. (For a duration of eg.
you switch between the two LED colours. Combine the
Indicates Sunrise Period
Indicates Daytime Period
Indicates Sunset Period
Indicates Evening Period
Up
o5).
o
Down
Light intensity