Märklin MAXI V 60 Series Anleitung Seite 21

2
Operation
The function of the individual switches is given below only for your information:
Switch Setting = on
1 Must always remain at "on"!
2 Must always remain at "on"
3 F3: Sound of a horn for a
switch engine
4 F4: Sound of a belle
5 F1: Sound of a bell
6 F1: Reproduction of the operating
sounds of a second motor
7 F2: Operating sounds of a
locomotive with one motor
8 F1: No sound effects production
22
Setting = off
Must never be at "off"!
Must never be at "off"!
F3: Sound of a horn for a
road engine
F4: Switches the Telex coupler(s)
F1: Reproduction of the horn version
not selected with switch 3
F1: Reproduction of the sound
effect selected with switch 5
F2: Operating sounds of a
locomotive with two motors.
F1: With sound effects production
Note
Do not change this!
Do not change this!
Selection is only effective when
switches 6 and 8 are set at "off"
Selection is only effective when
switch 8 is set at "off"
Set switch 8 at "off" only when
digital operation alone is being use