General System Information; System Requirements; Mounting - HomeMatic CCU3 Montage- Und Bedienungsanleitung

General system information

4 General system information
The smart home Central
communicates via the Homematic IP and Homematic
protocols. Homematic IP as well as Homematic
components can be
individually via the WebUI user interface or in connection
with partner solutions. The available functions provided
by the system in combination with other components
are described in the Homematic WebUI Manual. All
current technical documents and updates are provided at
www.eq-3.com.
5

System requirements

Current version of one of the following web browsers:
• Mozilla Firefox®
• Microsoft® Internet Explorer
• Google Chrome
• Safari
Data connection:
• Ethernet (TCP/IP and DHCP)
36
Control Unit
controlled comfortably
6

Mounting

CCU3 For mounting the CCU3 to a wall using the supplied
screws and plugs, please proceed as follows:
• Select a suitable mounting location on the wall,
and close to your router and a socket.
Make sure that no electricity or similar lines run at
this location!
• Use a pen to mark the positions of the two bore
holes for the brackets (E) with a distance of 90
mm on the wall (see fig. 2).
• Use an appropriate drill to make the 5 mm holes
as illustrated.
• Insert the plugs in the holes.
• Turn the screws into the plugs so that they pro-
trude from the wall by approx. 2.5 mm. Hang the
device using the brackets on the back behind the
screw heads.
Mounting
37