Maintenance And Cleaning; General Information About Radio Operation; Technical Specifications - HomeMatic HmIP-HAP Montageanleitung Und Bedienungsanleitung

Maintenance and cleaning

8 Maintenance and cleaning
The device does not require you to carry out
any maintenance. Enlist the help of an expert to
carry out any maintenance or repairs.
Clean the device using a soft, lint-free cloth that is
clean and dry. You may dampen the cloth a little with
lukewarm water in order to remove more stubborn
marks. Do not use any detergents containing solvents,
as they could corrode the plastic housing and label.
24
9 General information about radio
operation
Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possi-
bility of interference occurring. Interference can also
be caused by switching operations, electrical motors
or defective electrical devices.
The range of transmission within buildings can
differ greatly from that available in the open air.
Besides the transmitting power and the recep-
tion characteristics of the receiver, environ-
mental factors such as humidity in the vicinity
have an important role to play, as do on-site
structural/screening conditions.
eQ-3 AG hereby declares that this device complies
with the essential requirements and other relevant reg-
ulations of Directive 1999/5/EC. You can find the full
declaration of conformity at www.eQ-3.de.
10

Technical specifications

Device short description: HmIP-HAP
Supply voltage
plug-in mains adapter (input): 100 V-240 V/50 Hz
Power consumption
plug-in mains adapter: 2.5 W max.
Supply voltage: 5 V
DC
Current consumption: 500 mA max.
Standby
power consumption: 1.1 W
Degree of protection: IP20
Ambient temperature: 5 to 35 °C
Dimensions (W x H x D): 118 x 104 x 26 mm
Weight: 153 g
Radio frequency: 868.3 MHz/
869.525 MHz
Receiver category: SRD category 2
Typ. open area RF range: 400 m
Duty cycle: < 1% per h/
< 10% per h
Network: 10/100 MBit/s,
Auto-MDIX
Subject to technical changes.
Technical specifications
Instructions for disposal
Do not dispose of the device with regular do-
mestic waste! Electronic equipment must be
disposed of at local collection points for waste
electronic equipment in compliance with the
Waste Electrical and Electronic Equipment Di-
rective.
Information about conformity
The CE sign is a free trading sign addressed ex-
clusively to the authorities and does not in-
clude any warranty of any properties.
For technical support, please contact your re-
tailer.
25