For Your Own Safety; Intended Use; Machine Components - Kärcher BRS 40/550 C CARPET Betriebsanleitung

Operating Instructions

For your own safety!

For your own safety make sure
you carry this out before taking
the cleaner into use!
! Read and follow these
instructions and the enclosed
brochure before you take the
cleaner into use for the first time
Safety precautions
No. 5.956-251.
! No modifications are to be made
to the cleaner
! Only original parts are to be used
as accessories
! Do not allow children near the
cleaner
Danger from electrical current!
! Always remove the plug prior to
carrying out cleaning,
maintenance or repairs on the
cleaner
! Check the machine, especially
the mains cable, for damage
Take care when handling
cleaning agents!
! Follow the cleaning agent
manufacturer's safety instructions
! Wash off drops from eyes or the
skin using large amounts of clear
water
! Call a doctor immediately
! Wash contaminated clothing with
water

Intended use

This carpet cleaner is for cleaning
indoor loop pile and short-pile
velvet-pile carpeting.
Note:
This unit is suitable for commercial
use.
For our environment
The packaging materials are
recyclable. Please do not throw the
packaging in with household rubbish
but take it to a recycling centre.
Scrapped units consist of valuable
recyclable materials that should be
taken to a recycling centre.
Batteries, oil and similar products
must not be allowed to contaminate
the environment. Therefore, please
dispose of scrapped units via
appropriate disposal systems.
BRS 40/550 C CARPET
Carpet cleaner operation
description
— The BRS 40/550 C CARPET is
provided with two counter-
rotating brush rollers (1)
— When working with it the unit is
movable forwards, in reverse or
sideways
— Work with it in semi-circular
movements (high surface
capacity) or in straight lines
— The dirt bound by the prespray
agent and granules is loosened
by the brush rollers
— The granules have to be sucked
up by a vacuum cleaner
— Special brush rollers
(accessories) also enable
maintenance cleaning of hard or
elastic floor coverings

Machine components

1. Unlocking thrust clip
2. Recessed grip
3. Castors (running gear)
4. Splash guard (vertically
adjustable)
5. Strain relief
6. Power cable
English
1. Brush motor switch handle
2. Hinge
3. Support stirrup
4. Brush roller
5. Brush roller release
6. Sliding U-shaped protection
7. Turning handle for hinged clip
12