Design And Function; Design; Description - WIKA UPT-20 Betriebsanleitung

2. Design and function

2. Design and function

2.1 Design







Process connection, thread

Process connection, spanner flats

Sensor housing

Ex-relevant data

Case head


2.2 Description

The process transmitter processes the prevailing pressure and converts it into a current
signal. This current signal can be used for the evaluation, control and monitoring of the
process.
HART (option)
®
The instrument version with HART
Measuring range scaling (turndown)
The start and end of the measuring range can be set within defined ranges.
WIKA operating instructions process transmitter, model UPT-2x
Приборы & Автоматика +7 (495) 712-3209, 712-3218, 988-0959 www.k-avtomatika.ru 9880959@mail.ru

Push-on cap

Product label

Ground screw, outside

Electrical connection, cable gland

Second bore for cable gland (delivered sealed

with blind plug)
can communicate with a controller (master).
®
EN



7