Electrical Data; Setup Program - JUMO eTRON M Betriebsanleitung

Electrical data

Data backup
Connection
Electromagnetic compatibility
interference emission
immunity to interference
Operating conditions
Electrical safety
Accuracy of timer

6.1 Setup program

The program and the interface with adapter are available as accessories and offer the following advantages:
- simple and convenient parameterization and archiving via PC
- simple duplicating of parameters on instruments of the same type
- possibility of entering a linearization table
Minimum hardware and software requirements:
- PC Pentium 100 or compatible
- 128 MB RAM, 16 MB free on hard disk
- CD-ROM drive
- free COM interface
- Microsoft Windows 98/ME/NT4.0/2000/XP
h
Link PC interface to the RS232 interface on the PC
h
Insert black adapter (3 pins) into instrument from below
EEPROM
screw terminals for wire cross-sections up to 4 mm
2
and up to 2.5 mm stranded wire
EN 61326
Class B
to industrial requirements
The instrument is designed as a panel-mounting unit.
EN 61 010, Part 1, overvoltage category III, pollution degree 2
2.5 min/month, temperature error 10ppm/10°C
2
solid wire
23