Instructions For Use; Location Of Main Components; Knobs, Keys And Indicator Light Modes And Functions - MBM DOMINA 700 E477I Betriebsanleitung

3. 5.

INSTRUCTIONS FOR USE

Location of main components

The layout of the figures is purely indicative and can undergo variations.
1. Hotplate switch-on and temperature control knob;
2. Green indicator light;
3. Yellow indicator light;
4. Hotplate / Cooking compartment
4
2 3 2
1

Knobs, keys and indicator light modes and functions

The layout of the figures is purely indicative and can undergo variations.
Switch-on and thermostat knob (ELECTRIC). It performs three different functions:
1. Switches electricity inside circuit on and off.
2. Adjusting cooking temperature.
3. Heating phase Start/Stop.
Green shining light (ELECTRIC): the indicator is connected to the use of thermostat's knob. There
are three different types of signal:
1. Fixed lighting showing the correct operation.
2. Regular frequency light indicates that the equipment is waiting for the container positioning, in
order to proceed to the running.
3. Irregular frequency light signals a working mistake (see 4. ordinary maintenance – alarms list).
Red shining light (ELECTRIC): the indicator is connected to the use of thermostat's knob. Fixed
light shows a phase of mistake (see 4. Ordinary maintenance – alarms list).
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
3 2 3
1
4
2 3
1
4
2 3
1 1
- 7 - - 7 - 7 7
1
2 3