Replacement Parts And Accessories - Heidolph MR Hei-Standard Betriebsanleitung

In the case of fault, the heating will be switched off. The device can be reset by switching
off the device or interrupting the power supply (at least 10sec).

REPLACEMENT PARTS AND ACCESSORIES

Accessories (optional)
Product
Temperature controller, Hei-Con
Temperature controller, Hei-Con-G
Heating bath, 1l - for oil up to 250 °C
Heating bath, 1l, PTFE coated - for water up to 100 °C
Heating bath, 2l - for oil up to 250 °C
Heating bath, 2l, PTFE coated - for water up to 100 °C
Heating bath, 4l - for oil up to 250 °C
Heating bath, 4l, PTFE coated - for water up to 100 °C
Concave block adapter for 1l round-bottom flasks
Holder rod, stainless steel 1.4305 (V2A)
Holder rod, stainless steel 1.4305 (V2A) (for 4l heating bath)
Temperature sensor holder
Magnetic stirring rod set (3 rods), cylindrical with PTFE coating
MR-Hei-Standard silicone cover
Heating bath liquid, RT - 240 °C
DrySyn MULTI complete set, 3 x 25/50/100ml inserts
DrySyn MULTI-M complete set, 3 x 100/250ml inserts
DrySyn triple clamp for MULTI
DrySyn triple clamp for MULTI-M
DrySyn Multi safety handle
MR Hei holder
31
P/N
509-88000-00
509-88100-00
504-93000-00
504-93100-00
504-92000-00
504-92100-00
504-91000-00
504-91100-00
504-94000-00
509-81000-00
509-97000-00
509-67000-00
509-56000-00
23-07-06-05-63
515-31000-00
505-91900-00
505-92600-00
505-91090-00
505-92090-00
505-91091-00
509-96000-00
E