Requirements On The Installation Site; Electrical Connection; Appliance Description - Silvercrest SFS 150 B3 Bedienungsanleitung

GB

Requirements on the installation site

IE
CY

Electrical connection

Appliance description

Collection container
Suction connector
Sealing wire
Cutting device
Roll storage compartment
Guide rail
Indication lamp (red)
Lid release
Sealing button
6
For safe and fl awless operation of the appliance, the installation site must comply
with the following requirements:
■ When setting it up, place the appliance on a fi rm, fl at and horizontal
surface.
■ Do not operate the appliance in a hot, wet or very humid environment or
close to combustible material.
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
IMPORTANT
► Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network.
This data must match in order to avoid any damage to the appliance.
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
► Ensure that the power cable is not taut or kinked.
► Do not let the power cable hang over edges (trip wire eff ect).
♦ Insert the plug into a mains power socket.
SFS 150 B3