Residual Hazards - Gude GBS 315 UG Originalbetriebsanleitung

replaced at an authorised professional. Check the
extension cable regularly and if damaged, replace
it. Keep the handgrips dry and free of any oil and
grease.
•
Unplug. Unplug before any maintenance and
replacement of tools.
•
Do not leave any wrenches and spanners in the
machine. Make sure that any wrenches and
adjustment tools are removed before switching on.
•
Prevent unintentional switching on. Do not carry the
plugged-in machines with a finger on the switch.
When plugging in, make sure that the switch is in
off position.
•
Extension cables for outdoors use. When working
outdoors, use only the cable for the purpose
marked as appropriate.
Residual Hazards and Protective Action
Mechanical Residual Hazards
Hazard
Cutting, incision
Catching, winding
Electrical Residual Hazards
Hazard
Direct electrical contact
Indirect electrical contact
Materials and Other Substances Hazards
Hazard
Contact, aspiration
Human Factors Neglect
Hazard
Neglect use of personal
protection equipment
Inadequate local lighting
Description
Risk of injury caused by rotating
parts
A contact with rotating band
may cause severe injuries.
Loose-fitting clothes, jewels or
long hair may be caught by
moving parts.
Description
Defective cable or plug may
cause an electrical shock
Wounds cause by conductive
parts on open electrical or
defective structural parts.
Description
Lungs may be affected by great
amount of dust being formed.
Health-hazardous sawdust
emissions form operations
without extracting the dust.
Description
Operating the unit without
adequate PPE may cause
severe external/internal injuries
Insufficient light is a heavy
safety risk.
•
Be attentive at any time. Watch out what you are
doing. Proceed thoughtfully. Do not use the
machine when feeling unconcentrated.
•
Check the machine for damages. Inspect the
machine before any following use and check the
function of protective devices. Check the function of
movable parts for jamming or damage. All the parts
must be mounted correctly and meet the conditions
that guarantee a perfect operation.
.
Emergency Action
Apply the first aid adequate to the injury and get qualified
medical assistance as quickly as possible. Protect the injured
person from more accidents and calm him/her down.
Assigned Use
The band use is allowed for cutting wood or soft plastics. Only
manufacturer-recommended bands are allowed for use.
Firewood cutting is prohibited.
The manufacture shall not be held liable for any damage
should the provision of general regulations and this instruction
manual be not observed
Protective Action
Never touch the saw band while
it is moving
Wear tight-fitting garments and
no jewels. Protect your hair with
a hairnet.
Protective action
Have the defective cable/plug
exchanged by a professional.
Use the unit only if connected
via a faulty current switch (FI).
Always unplug before any
maintenance.
Operate only with FI switch
installed.
Protective Action
Always wear breathing mask
when working with the unit.
Install and use an exhaust
equipment.
Protective Action
Always wear prescribed
protective clothing and work
considerately.
Provide for sufficient lighting
17
GB

Residual Hazards

Worn or damaged aids should be
replaced immediately.
Residual hazards
Residual Hazards
Residual Hazards