Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7 Calling up the Camera via a
Computer
To call up the user interface of the camera,
enter its IP address in the address bar of
the program Windows Internet Explorer (IE,
version 6 or higher) . The IP addresses of the
computer and of the camera must be in the
same subnet . The number of simultaneous
accesses to the camera is limited to 6 .
When the camera is called up, the
log-in window will appear . Select the lan-
guage for the user interface . The descrip-
tion below refers to English . Then enter
the user name and the password (default
setting for both: admin) . Individual log-in
data can be defined later in the camera
settings .
Important: To prevent unauthorized access, change
at least the password .
The Flash Player extension from Adobe
provided on many computers (also availa-
ble on the CD provided) will allow a basic
display of the camera image . Faster image
transmission and availability of all func-
tions, however, requires installation of the
ActiveX extensions . These extensions will
be loaded from the camera when the Flash /
ActiveX line g (
☞
fig . 6) is clicked for the
first time . If necessary, reduce the security
settings of the IE accordingly to allow the
installation process . Save the installation file
"webPlugins .exe" to the computer, close
the IE and execute the file .
h
➅
10
When the connection to the camera has been established, the view with the current
camera image (fig . 6) will be displayed . The following options are available:
a View "Live Video" with display of camera image
b View "Playback" to replay the recordings from the camera
c View "Configuration" to change the camera settings
d Button
e Button
f Camera image with information on the stream currently transmitted
g Click this line to switch between use of Flash Player and ActiveX for display of the live
image
h Toolbar with the following functions:
/ : Stop/Start of image transmission
"Stream": Selection of a stream (when selecting a different stream, click to stop the
: Activation/Deactivation of audio transmission from the camera [Audio Input (11)]
: Activation/Deactivation of audio transmission to the camera [Audio Output (12)]
: Specific camera settings (e . g . brightness control, mirror image)
: Snapshot function to save a snapshot as an image file
When the camera image is clicked with the right mouse button, the following menu
will appear:
Full Screen (Exit Full Screen)
Sensor
Zoom In / Out
Restore Panorama
a
f
g
to change the password
to log out
transmission of the current stream)
Menu Item
full-screen image (exit)
alternatively: double-click the image
like
zooming in / zooming out
alternatively: use the scroll wheel to zoom in/out or drag the mouse
to select the desired image section
display of the entire image (after zooming in)
b
c
Function
d
e
Werbung
Inhaltsverzeichnis
