E N
At this point you can input your desired password
which must be composed of 6 characters. Press the
"Esc" button one or more times to go back to previ-
ous menu levels or to exit the menu.
ENERGY SAVING
The machine is programmed to be able to go into
energy saving mode after a certain time of inactiv-
ity. The preset value is 2 hours.
In Energy Saving mode the display on the machine
shows:
ENERGY SAVING
To bring the machine back to ready mode it is suf-
ficient to press any selection button. By confirm-
ing the "Energy Saving" item with "Enter" you can
choose between the following two options by
pressing the 4 and 5 buttons:
Energy saving deactivated
➤
Energy saving activated
➤
You can choose to activate or deactivate Energy
Saving using the "Enter" button. Press the "Esc" but-
ton one or more times to go back to previous menu
levels or to exit the menu.
CARD CHECK
This function allows the operator to check a chip
card, independently of its use. By confirming the
"Check card" item with "Enter" the display will show
the following message.
INSERT CARD
By inserting a chip card into the slot on the machine
the information on it will be shown on the display.
Pull out the chip card and press the "Esc" button
one or more times to go back to previous menu lev-
els or to exit the menu.
DISPENSE COUNTER
This function allows to analyse the beverage supply
counter, the statistics relevant to the different ma-
chine selections and also to activate or deactivate
the total counter view on the display. Confirming
with "Enter" the menu item "Dispense counter" and
pressing the keys 4 and 5 allow to scroll the follow-
ing menu items.
28
SETTINGS MENU
Tot drinks dispensed 000079
➤
Confirming with "Enter" the menu item "Tot
drinks dispensed" and pressing the keys 4 and
5 allow to scroll the different beverage supply
counters.
➤
➤
➤
➤
Counter display
➤
By confirming the item "Counter display" with
"Enter", it is possible to activate or deactivate
the display of the total counter on the machine
display at the moment of the start-up with the
main switch.
By pressing "Esc" once or more times, it is possible
to return to the previous levels or exit the menu.
WATER SOFTENER COUNTER
This function allows to set the processed litres by
the water softener filter and to display the counter
of the processed litres from its activation. By con-
firming the item "Water softener counter" with the
"Enter" key, it is possible to select the following two
options by pressing the keys 4 and 5.
Litres setting
➤
Refer to the instructions of the used filter,
relating to the maximum number of pro-
cessed litres, indicated for the specific wa-
ter hardness of their location. We accept no
responsibility for any consequences due to
wrong or not confirmed settings as indicat-
ed in the instructions of the filter in use.
By confirming with the "Enter" key and by pressing
the keys 4 and 5, the value of processed litres with
the filter in use is modified, when they are exceed-
ed, the display will show:
Confirm with the "Enter" key the maximum value of
processed litres.
Processed litres
➤
By confirming with the "Enter" key, the counter
of litres dispensed by the machine from the time
of the filter activation can be shown. By pressing
"Esc" once or more times, it is possible to return
to the previous levels or exit the menu.
Tot product 1 dispensed 000027
. .
. .
Tot product 6 dispensed 000008
REPLACE
SOFTENER