Transporting The Appliance - Krups EA829 LATT’ESPRESS Handbuch

PRODUCT INFORMATION
PRODUCT
INFORMATION
Cappuccino cleaning
*: The first two options in the Filter sub-menu will not be confirmed unless you have correctly installed a filter
previously, with the programme accessible via MAINTENANCE ► FILTER ► INSTALL.
You can turn off your appliance at any time. When stopped, the machine emits a double beep and "Good-bye" is displayed on the
screen. The appliance has registered your request and will stop as soon as possible.
Keep and use the original packaging to transport the appliance.
If the appliance is dropped while not in its packaging, it is recommended that you take it to an approved repair centre to avoid
any risk of fire or electrical problems.
END-OF-LIFE ELECTRIC OR ELECTRONIC PRODUCTS
Think of the environment!
Your appliance contains many materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
28
Coffee cycles Displays the total number of coffees produced by the machine.
Water cycles Displays the total number of hot water cycles carried out by the machine.
Cappuccino cycles Displays the total number of cappuccino cycles carried out by the machine.
Rinsing Displays the total number of rinsing operations carried out by the machine.
Coffee cleaning
Displays the total number of cappuccino cleaning operations carried out by
the machine.
Descaling
Filter
TURNING OFF YOUR APPLIANCE

TRANSPORTING THE APPLIANCE

Displays the number of coffees carried out since the last
Last
cleaning operation.
Displays the number of coffees that can be produced
Next
before the next cleaning operation.
Clean Starts the cleaning programme.
Exit Takes you back to the previous menu.
Displays the total number of hot water or steam cycles
Last
made since last scale removal.
Displays the number of hot water or steam operations that
Next
can be carried out before the next descaling operation.
Exit Takes you back to the previous menu.
Displays the date of the last filter change* and the
Last
quantity of water used.
Displays the date for the next filter change* and the
Next
quantity of water to run through.
Install Starts the filter replacement procedure.
Exit Takes you back to the previous menu.