Connecting The Water Outlet; Electrical Connection Of The Unit - HYDAC LVU-CD-40/ -T001 Montageanleitung

Connecting the water outlet

Connect the water outlet to a depressurized reservoir without cross-section
reduction. Reservoir height max. 1.5 m and no higher than the fluid level in
the tank.
Excess pressure at the water outlet
The unit will be damaged
Guide the water outlet into a depressurized reservoir.
►

Electrical connection of the unit

The filtration unit has a main switch with motor protection, connector cable
with a power plug. Connect the electric motor to the terminal box of the
electrical motor for right-hand rotation.
Unwind the connector cable fully. Plug the power plug into a suitable,
earthed, protected power outlet. Match the specifications for the power
supply and frequency on the unit with the network specifications.
LVU-CD-40 /-T001
BeWa LVU-CD-40-T001 4142242a en-us 2016-05-13.doc
The separated water can contain some parts of fuel.
Dispose of the water-fuel mixture in an environmentally
friendly manner.
NOTICE
DANGER
Exposed electrical terminals in the terminal
box on the electric motor
Danger of fatal injury due to electric shock
Any work involving the electrical system may
►
only be done by a properly trained, certified
electrician.
en(us)
Unit setup/connection
Page 27 / 52
2016-05-13