Siemens SITRANS LR200 Kurzanleitung Seite 13

12. Equipment Marking
The equipment marking contains at least the information on the product nameplate.
LR200 Version
Flameproof
Increased Safety
Explosion-proof
Non-incendive
Intrinsically Safe
RUN Mode and PROGRAM Mode
SITRANS LR200 has 2 modes of operation: RUN and PROGRAM.
After you complete the installation procedures and power up SITRANS LR200, it starts in RUN
mode and detects the material level. It returns the distance (in meters) to the material level
referenced from Empty (process empty level). This is the default start-up display mode.
RUN Mode Display
Use the hand programmer to control the display.
Normal operation
2
4
1
7
Page EN-12 SITRANS LR200 (HART) – QUICK START MANUAL
Approval Rating
ATEX II 1/2 G, EEx dm ia IIC T4
ATEX II 1/2 G, EEx em ia IIC T4
FM/CSA:
Class I, Div. 1, Groups A, B, C, D Class
II, Div. 1, Groups E, F, G
Class III
FM:
Class I, Div. 2, Groups A, B, C, D T5
FM:
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III
ATEX II 1 G, EEx ia IIC T4
ANZEX Ex ia IIC T4 (Tamb = –40 to +80
IP67
IECEX TSA 04.0020X
CSA:
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III
5
6
m
See page 7
See page 7
See page 8
T4
See page 8
T4
o
C)
See page 8
T4
T4
Failsafe operation
4
1
7
Nameplate
5
6
m
7ML19985QL83