General Guidelines; Technical Specifications; Key Description; User Manual - Velleman VTBAL6 Bedienungsanleitung

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
2.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
3.

Technical Specifications

capacity
display resolution
counting range
tare range
min. input piece weight
operating temperature
power supply
power consumption
zero range
dimensions
spare PSU
4. Setting Up Your Scales
Place the scales on a stable and horizontal surface where it is out of the sunlight and protected against
extreme temperatures and temperature changes, humidity, fumes, dust, draughts and electromagnetic
fields. Turn the adjustable feet until the scales are level. Insert the battery into the scales minding the
polarity. Connect the scales to the PSU and insert the PSU into the mains.
5.

Key Description

→
V. 02 – 07/07/2015

USER MANUAL

6 kg / 12 lb.
6.0000 kg x 0.000 5 kg / 13.2280 lb. x 0.0010 lb.
0-16777216
0-100 % full scale
0.5 g / 0.0002 lb.
15 °C – 35 °C
220 V~, 12 VDC PSU + internal rechargeable battery 6 V / 4 Ah (both incl.)
< 120 mA at lowest brightness setting (default setting = 200 mA)
power-on zero range ± 5 % full scale
110 x 290 x 330 mm
PS1205R
Numeric keypad
Clear the entered data (in input mode) or exit input mode after clearing data
Confirm and save the entered data (in input mode) or confirm operation (all
other modes)
Zero the scales – range is power-on zero point ± 5 % - proper power-on zero
point is calibration zero point ± 10 % of FS
Tare function – tare range is 0 ~ 100 % of FS
Totalising function
Choose the current weighing unit (kg or lb.) or piece weighing unit (g or lb.)
Input the piece weight
Input the upper limit
Input the lower limit
On/off key or exit key when in auto off setting mode and calibration mode
VTBAL6
3 ©Velleman nv