En - Certification - Miele professional G 7895 Gebrauchsanweisung

en - Certification

The Miele Aqua Purificator G 7895 with
water softener canister E 310 or E 318
must be safety tested after commissio-
ning and after any maintenance work
in accordance with local and national
safety regulations on the use of pres-
surised containers.
– A - Check that the following are all
present
At the installation site, make sure the fol-
lowing are all present (see sticker on ca-
nister):
1. 1. Certification of the pressure test by
the manufacturer of the pressurised
canister.
2. Instructions on how to use the
pressurised canister.
3. 3. Technical data for the pressurised
canister.
– B - Equipment check
1. Make sure all components are present:
– Pressure hose from supply to canister
– Pressure hose from canister to
conductivity sensor
– Pressure hose from conductivity
sensor to machine or
– Pressure hose from conductivity sen-
sor to machine supplying the water
– Water supply (on request)
– Cartridge
2. Check everything works correctly
34
– C - Test of installation requirements
1. The pressurised canister is housed in
the Miele Aqua Purificator G 7895.
2. The Miele Aqua Purificator G 7895 is
designed so that it is accessible from the
front.
– D - Regular testing according
Points A, B and C must be checked by a
Miele Service Technician every 5 years.
Miele Service Department
Date __________________________
___________________________________
(Signature)