Assembly, Connection And Using For The First Time - Conrad 75 16 59 Bedienungsanleitung

Button „AUTO"
Press this button while using the „VGA input" source, to automatically centre the
image and to adjust it to full size.
„INPUT" button
This button is used to select the source of the video input (AV1, S-VIDEO, VGA or
antenna).
„DISPLAY" button
Shows the video input source and the number of the channel.
„ESC" key
Back or leave menu.
„RECALL" button
Use this button to return to the previous channel.
7. Assembly, Connection and Using for the
First Time
When installing the device, make sure the connection cables are
not squeezed or damaged by sharp objects.
The monitor's stationary mounting base can be attached by
using the three fixing holes on the bottom. Make sure that
cables or wires are not damaged when drilling or bolting in
place.
All system components are only approved for use in dry indoor
locations.
32