Startup / Operation - BOMANN KG 7300 Bedienungsanleitung

(6) Disassemble the middle door
•
hinge; lift out the lower device door.
(7) Move the blind plug and the hinge
•
pin retainer on the top of the door and
(8) the doorstop on the underside of
the door.
(9) Move the blind cap and plugs on
•
the exposed holes of the middle door
hinge.
(10) Tilt the unit slightly backwards
•
and lock it in this position. Unscrew
the feet and disassemble the lower
door hinge.
(11) Transfer the lower door hinge to
•
the opposite device side; after moving
the pin to limit the door opening into
the exposed hole.
(12) Fasten the hinge and turn in the
•
feet.
Put the device back in the upright
•
position. Put on the lower door and fix
it in the intended position.
(13) Turn the middle door hinge
•
about180°, transfer it to the opposite
device side and fasten the hinge.
Put on the upper appliance door and
•
fix it in the intended position
(14) Transfer the upper door hinge to
•
the opposite device side after
unscrewing the hinge pin and
replacing it from the other hinge side.
(15) Secure the hinge.
•
(16) Replace the device cover and
•
fasten it.
Check that the doors are aligned
vertically and horizontally to ensure
proper opening and closing of the doors.

Startup / Operation

Startup / Operation
Startup / Operation Startup / Operation
Prior to first use Prior to first use Prior to first use Prior to first use
CAUTION: CAUTION:
CAUTION: CAUTION:
After transport, the appliance should be
left standing upright for 24 hours before
connecting to the power supply. Nonob-
servance could lead to malfunction of the
cooling system and causes an appliance
breakdown.
Clean the appliance interior including all
accessory parts. Consider the instruc-
tions which we provide in the chapter
"Cleaning and Maintenance".
27