Identifying Parts And Controls; Getting Started - Sony GDM-4011P Bedienungsanleitung

Identifying Parts and Controls

See the pages in parentheses for further details.
Front
1 ? (reset) button (page 16)
Resets the adjustments to the factory settings.
2
(auto sizing and centering) button
(page 6)
Automatically adjusts the size and centering of the
images.
3 ¨ (brightness) (./>) buttons (pages 7 –
16)
Adjust the picture brightness.
Function as the (./>) buttons when adjusting other
items.
4
(menu) button (pages 7 -16)
Displays the MENU OSD.
5 > (contrast) (?//) buttons (pages 7 – 16,
20)
Adjust the contrast.
Function as the (?//) buttons when adjusting other
items.
6 u (power) switch and indicator (pages 17,
20)
Turns the monitor on or off.
The indicator lights up in green when the monitor is
turned on, and lights up in orange when the monitor is
in power saving mode.

Getting Started

Rear
8 AC IN connector
Provides AC power to the monitor.
9 Video input 2 connector (13W3)
Inputs RGB video signals (0.714 Vp-p, positive) and
SYNC signals.
A2 A3
A1
Note
If you use a computer or video board of high output level (about 1.0
Vp-p), you may not be able ot obtain the optimum display. In such
case, try decreasing the picture contrast, or use a computer or video
board with a lower output level.
!º Video input 1 connector (HD15)
Inputs RGB video signals (0.714 Vp-p, positive) and
SYNC signals.
5 4 3 2 1
10 9
15 14
Pin No. Signal
1 Red
2 Green
(Composite
Sync on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
* Display Data Channel (DDC) Standard of VESA
Getting Started
( HD15)
(13W3)
A1:Red
A2:Green
A3:Blue
8 7 6
13 12 11
Pin No. Signal
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional
Data (SDA)*
13 H. Sync
14 V. Sync
15 Data Clock(SCL)*
EN
F
D
ES
I
5