Proper Use; Device Elements - Würth GSL 700-E Originalbetriebsanleitung

Pull the plug out of the socket before adjusting
■
the machine, before tool changing, servicing
or cleaning the machine.
We recommend using a stationary extractor
■
system and connecting a residual current
circuitbreaker (FI) upstream. If the machine is
switched off by the FI circuit-breaker tripping,
the machine must be checked and cleaned.
Motor cleaning, see chapter Maintenance /
Cleaning.

Proper use

The tools may be used only for the following
applications:
For fine grinding work with grinding pencils on
■
metals.
For fine cutting work with small cut-off wheels
■
on metals.
For milling of NF metals, plastics, hardwood,
■
etc. using end mills
For working with fine wire and round wire
■
brushes
For working with form polishers
■
For working with felt polishers
■
For working with lamellar grinding wheels
■
Not intended for use with bell-type polishers.
Any other use than the described above shall be
deemed to be improper use.
The user is liable for damage resulting
from improper use.
18
Safety instructions
Only use genuine Würth accessories
■
and spare parts.
Overview (fig. I)
1 Collet
2 Collet nut
3 Rubber sleeve*
4 Spindle lock*
5 On/Off switch
6 Main handle
7 Setting wheel for speed adjustment
* depending on the model

Device elements