Additional Safety Warnings; Intended Use; Product Features; Tool Specifications - Würth EWS 14-125 INOX Originalbetriebsanleitung

OBJ_BUCH-0000000041-002.book Page 13 Wednesday, August 10, 2011 11:39 AM
Additional safety warnings specific
for abrasive cutting off operations
 Do not "jam" the cut-off wheel or apply
excessive pressure. Do not attempt to
make an excessive depth of cut. Overstress-
ing the wheel increases the loading and susceptibil-
ity to twisting or binding of the wheel in the cut and
the possibility of kickback or wheel breakage.
 Do not position your body in line with
and behind the rotating wheel. When the
wheel, at the point of operation, is moving away
from your body, the possible kickback may propel
the spinning wheel and the power tool directly at
you.
 When wheel is binding or when interrupt-
ing a cut for any reason, switch off the
power tool and hold the power tool
motionless until the wheel comes to a
complete stop. Never attempt to remove
the cut-off wheel from the cut while the
wheel is in motion otherwise kickback
may occur. Investigate and take corrective action
to eliminate the cause of wheel binding.
 Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed
and carefully re-enter the cut. The wheel
may bind, walk up or kickback if the power tool is
restarted in the workpiece.
 Support panels or any oversized work-
piece to minimize the risk of wheel pinch-
ing and kickback. Large workpieces tend to
sag under their own weight. Supports must be
placed under the workpiece near the line of cut and
near the edge of the workpiece on both sides of the
wheel.
 Use extra caution when making a
"pocket cut" into existing walls or other
blind areas. The protruding wheel may cut gas
or water pipes, electrical wiring or objects that can
cause kickback.

Additional safety warnings

The machine must not be damp
and must also not be operated in
damp suroundings.
Before each use of the unit, check the
cable and plug. If damage is detected, do
not use the unit. Have repairs performed
only by a qualified technician. Never
open the unit yourself.
 Use only original Würth accessories.

Intended Use

The machine is intended for dry grinding and cutting of
metal and stone.
For damage caused by usage other than intended, the
user is responsible.

Product Features

1 Auxiliary handle (insulated gripping surface)
2 Spindle lock button
3 Gear head
4 Type plate
5 On/Off switch
6 Spindle
7 Clamping lever for quick-clamping protection
guard
8 Quick-clamping protection guard
9 Clamping flange
10 Clamping nut
11 Thumbwheel for speed preselection
Not all of the accessories illustrated or described
are included as standard delivery.

Tool Specifications

Angle Grinder
Article number
Rated power input
Output
Rated speed
Speed range
Grinding disc diameter, max.
Grinding disc thickness
Mounting bore
Max. circumferential speed
Spindle collar dia.
Weight
Class of protection
EWS 14-125
INOX
0702 478 X
1400 W
800 W
-1
7500 min
2100 –
-1
7500 min
125 mm
1 – 6 mm
22.23 mm
80 m/s
M14/SW17
2.4 kg
II
13