Technical Data - NUK Eco Control Video Display 550VD Bedienungsanleitung

Fault
Parent unit is
beeping
Connection
indicator 20 has
lit up red
No sound from
the parent unit
If these hints do not solve the problem you
can try to clear the fault as follows:
1. Take the battery out of the parent unit.
2. Unplug the mains adapters from their
power sockets.
3. Wait a few minutes.
Wireless connection
Transmission frequency
Number of channels
Line of sight range
Range within enclosed
rooms
Operating temperature
Operating temperature
Battery
Input
Output
Cause
Connection to the baby unit has
been lost
Problem with the power supply
The parent unit is out of range
Volume is muted
VOX function is set too low

9. Technical data

2.4 GHz FHSS
2405 - 2475 MHz, max EIRP 100mW
32 / automatic channel selection
about 250 m
about 40 m. Successful transmission depends on the
environment. Walls or trees can seriously interfere with
reception.
0 °C to 40 °C ambient temperature
0 °C to 40 °C ambient temperature
Lithium polymer battery (rechargeable), , 3.7 V, 1260 mAh
Period of operation in normal transmission mode: at least
8 hours
Period of operation in Eco-Mode: > 8 hours
Charging time when battery is charged for the first time: at
least 10 hours,
on subsequent occasions, charging takes about 6 hours
100–240 V AC; 50/60 Hz; 200 mA
6 V ; 600 mA;
Set up the connection (see
"4.3 Connecting baby unit and parent
unit" on page 51)
Check the power supply (see
"4.4 Power supply" on page 51)
Set up the connection (see
"4.3 Connecting baby unit and parent
unit" on page 51)
Increase the volume (see "6.14 Mute
function" on page 71)
Increase the transmission sensitivity
(see "6.8 Setting the VOX sensitivity
level" on page 62)
4. Replace the battery and plug the mains
adapters back in.
If this has not resolved your problem, please
contact one of our Service Centres (see
"11.2 Service
page 76).
Baby unit
Parent unit
Mains adapters
74
Remedy
Centres Babyphone" on