Leckey Horizon Bedienungsanleitung Seite 17

8.7 Flexible Lateral
Support Adjustment
The flexible lateral supports can be adjusted
in height and width. To adjust the width,
loosen the knob on the back of the chest
pad. Then adjust the lateral support to
the required position and finally re-tighten
the knob. To change the height, loosen as
before, slide the bracket out fully and insert
in an alternative slot, replace the knob and
tighten securely. As the lateral brackets are
staggered in height, additional height range
can be achieved by swapping the lateral
from the left to the right side. For finer
height positioning loosen the allen bolts (a),
position the lateral as required and then
re-tighten the bolt securely. The flexible
lateral supports are secured around the
user by tightening the safety strap (b) into
position. Fasten the safety strap immediately.
Check the laterals are secure before
placing the user in the product. As if
they are loose the user may be at risk of
slipping into a position they cannot not
recover from and could restrict
their breathing.
a
b