How To Attach The Headsupport In Prone - Leckey Horizon Bedienungsanleitung

7.5 How to attach the
headsupport in prone
If headsupport is need in prone standing
the Leckey Interface Frame (LIF) can be
used with Horizon Stander. The LIF is
attached to and removed from the frame by
the metal brackets located below the chest
pad. To attach the slide the metal bars into
the receiving tubes to the required depth
and secure by tightening the knobs (a) on
either side.
Please refer to the specific user manual on
the Leckey Interface Frame to safely position
the frame and its accessories.
This frame will also accommodate
the Whitmyer pro-series range
of headsupports.
7.6 How to attach
Flexible Hip Pads
To attach the flexible guides, loosen the
plastic knob at the back of the pad and slide
the metal bracket into the slot. Then when
set to the desired with retighten the plastic
knob. Repeat on the other side.