Specifications - IMG STAGE LINE CPL-3DMX Bedienungsanleitung

6.3 Control with the LED-4C
The unit LED-4C from "img Stage Line" is an easy-to-
use controller which also allows to control the CPL-
3DMX. The LED-4C is equipped with 4 channels so
that all units connected to it can only be controlled syn-
chronously.
Set the start address of the CPL-3DMX to 1 or to a
multiple of 4 + 1 (5, 9, 13, ..., 61 max.),
Detailed information for operation can be found in the
manual of LED-4C.

7 Specifications

Current rating: . . . . . . . 3 × 1.5 A max.
Power supply: . . . . . . . . 12 – 24 V ,
No-load current: . . . . . . 110 mA
Ambient temperature: . . 0 – 40 °C
Dimensions: . . . . . . . . . 193 × 40 × 72 mm
Weight: . . . . . . . . . . . . . 460 g
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
chapter 6.2.
depending on the LEDs
connected
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
7.1 DMX channels
DMX value Function
Channel 1: proportion of red
0 – 255 brightness of red
Channel 2: proportion of green
0 – 255 brightness of green
Channel 3: proportion of blue
0 – 255 brightness of blue
Channel 4: simmer / music control / stroboscope
0 – 7 light off
dimmer: dark → bright
8 – 190
music-controlled change of colour
191 – 200
via integrated microphone
stroboscope: slow → fast
201 – 247
248 – 255 maximum brightness
Subject to technical modification.
GB
11