Technical Characteristics - Facom 914 Bedienungsanleitung

A) Technical characteristics
Weight :
Overall dimensions :
Max. pressure on the manometer :
Description
1 - Adapter R 1/8" DIN 2999
2 - Adapter 1/8" x 27 NPT
3 - Adapter 1/4" x 18 NPT
4 - Adapter 3/8" x 20 UN
5 - Adapter 1/2" x 20 UNF
6 - Adapter M10 x 1
7 - Adapter M12 x 1.5
8 - Adapter M14 x 1.5
9 - Adapter M16 x 1.5
10 - Adapter M18 x 1.5
11 - Manometer + tube + straight connector
12 - 90° elbow connector
13 - Replacement seal kit
B) Use
With engine stopped
• For pressure testing conditions, please refer to vehicle manufacturers recommended
engine temperature and RPM.
• Place a bowl under the vehicle to collect the used oil.
• Remove the oil pressure sensor
• Choose the adapter which matches the diameter of the sensor.
• Connect the quick coupling
.
(see fig. 1.2)
With engine running
• Read the oil pressure.
• Compare the results with the recommended manufacturer's values and with the
pressure gauge on the vehicle's dashboard, if there is one.
With engine stopped
• Allow the pressure to drop back to zero before removing the quick coupling.
• Unscrew the adapter.
• Refit the oil pressure sensor and change the seal. Respect the recommended
tightening torque.
(without seal)
(or mano. switch)
, if necessary using the 90 ° elbow, n° 12
(see fig. 1.1)
2.25 kg
380 x 350 x 140 mm
8 bar
914.01
914.02
914.03
914.04
914.05
914.06
914.07
914.08
914.09
914.10
914.20
914.21
914.22
.
GB