Metrohm 751 GPD Titrino Gebrauchsanweisung Seite 183

751 GPD Titrino
3.2.2.173. Setup.RamInit
Initializes instrument, see page 204. All parameters are set to their default
value and error messages are cleared. The user and silo memories will be de-
leted. The user memory contains the default user methods from Metrohm.
3.2.2.174. Setup.InstrNo
Setup.InstrNo.Value
Instrument identification for report output.
Set the value with &Setup.InstrNo $G .
3.2.2.175. Diagnose.Report
Output of the report containing the adjustment parameters. The Titrino has to
be in its inactive basic state.
3.2 Remote control commands
serial number, 8 ASCII characters
$G
$G
$G
179