D) Assembly Of The Tail Spur; E) Mounting The Elevator And Rudder Servos - Reely SKY X-Ray Bedienungsanleitung

d) Mounting the Tail Spur
The tail spur (1) is already firmly glued to the rudder (2)
ex works.
For hard use (e.g. on grass pists) we recommend that
the tail spur be additionally secured with a thread-cutting
screw 1.5 x 8 mm (3).

e) Mounting the Elevator and Rudder Servos

Install the servos for elevator and rudders as shown in
figure 4.
Install one clevis each to the rudder linkages.
Put the elevator and rudder servos in the neutral
position so that the servo rudder horns are at precisely
90° to the servo casing.
Shorten the rods so that the elevator and rudder are
also in the neutral positions.
Figure 3
Figure 4
31