Scope Of Delivery; Accessories - Reely SKY Breeze Bedienungsanleitung



4. Scope of delivery

Before assembling the model, check the piece list to make sure all parts are included. Please note that the numbers in the list always refer to the adjoining
illustrations.
Main components:
1 Elevators
2 Canopy
3 Fuselage
4 Wing centre section
5 Outer wings
Please note:
The elevators and the model's wings are already covered with a heat shrink film. Until the model plane has reached your workshop, the heat shrink
film and the surface beneath it have gone through several changes of climate. Due to changes in temperature and humidity, the heat shrink film and
the surface beneath it are in constant motion. This can lead to bubbles and wrinkles in the heat shrink film.
This is not fault and does not justify a complaint. It is a normal process which can also manifest itself during operation. Wrinkles can be removed
easily by carefully heating them with an iron (first temperature setting) or a heat gun and then smoothing them out with a dry, soft cloth.

Accessories:

6 Servo recess covers
7 Wooden parts for servo installation
8 Wooden parts for wing installation
9 Bowden cables for elevator linkage
10 Small parts for linkage and wing installation
The following components not included in delivery are required for assembly and operation:
Assembly:
Soldering iron, servo extension cable, heat shrink tube (inside diameter approx. 2.5 mm), heat gun, box cutter, small drilling machine with different drills,
screwdriver, 5-minute epoxy resin, if needed thixotropic agent (micro balloons or cotton flocks) to thicken the resin, superglue, sandpaper, Velcro tape or double-
sided adhesive tape.
Caution!
Observe the security notes of the respective manufacturer when using glues and work with glues in well-ventilated rooms only.
Operation:
To fly the model, you require a suitable remote control with four channels, a suitable electric motor with a suitable propeller, a speed controller with a built-in BEC
that suits the motor, and a flight battery with approx. 1,300 mAh and the corresponding connectors.
20
2
4
10
3
5
8
7
9
1
Figure 1
6
Figure 2