Herunterladen Diese Seite drucken

Intended Use; Caractéristiques Techniques; Product Description - Reely SKY Tutor Bedienungsanleitung

Werbung


12. Caractéristiques techniques
Empattement: ...................................................... 1440 mm
Longueur : ........................................................... 1160 mm
Poids : .................................................................. selon l'équipement à partir d'env. 1470 g
Superficie : ........................................................... 33,4 dm²
Charge alaire : ..................................................... 44 g/dm²
Moteur : ................................................................ moteur Brushless à rotor intérieure, type F18/10
Hélices appropries : ............................................. 10 x 5"
Charge admissible du variateur de vitesse : ....... 28 A
Accumulateur d'entraînement LiPo adapté : ...... 3 cellules, 11,1 V, 2500 à 3200 mAh env.
Télécommande : .................................................. 4 canaux minimum
88


2. Intended Use

This product is an electrically driven model airplane which is radio controlled wireless via the remote control system to
be separately purchased. The model is designed for outdoor use and should be flown under weak winds or in calm
weather conditions only. The plane is pre-mounted and can be fully mounted ready for flight in a short period of time.
The product must not get damp or wet.
The product is not suitable for children under 14 years of age.
Take note of all the safety notes in these operating instructions! They contain important information
regarding the handling of the product.
You are solely responsible for the safe operation of the model!


3. Product description

The "Tutor" model plane is a pre-fabricated ARF model (ARF = "Almost Ready to Fly") suitable for model flight novices
and model flight pilots due to its design as a high wing plane and due to the profile selection as airfoil wing.
The body, the wings and the tail units are made from laser-cut wood parts and stringed with multi-colour heat-shrink
film. Apart from the already installed standard servos, a suitable drive set consisting of flight control system, bushless
engine and propeller is enclosed with the model.
For simple ground starts the model is equipped with a three-leg gear which a nose landing gear is attached to.
The model can be controlled over 3 axes and can be equipped with the necessary remote control components and
finished within a short period of time. The controllable features are: aileron (longitudinal axis), vertical rudder (lateral
axis) and yaw rudder vertical axis) as well as the speed control of the electric engine.
33

Werbung

Kapitel

loading