Corradi Pergotenda 45 Benutzerhandbuch Seite 34

RESOLUTION OF PROBLEMS WITH THE ELECTRIC DRIVE MECHANISM
PROBLEM
The motor won't start
The motor starts but the awning won't move
The awning moves erratically
The motor won't start
The motor starts but the awning won't move
The awning moves erratically
32 of 119
CAUSE
There is no electricity
It is not plugged in
The motor has overheated and the led on the control panel is lit
Depleted remote control batteries
Broken fuse (only for electric command type 2 and type 3)
Possibly broken belts, or disconnection from drive shaft
Dirty runners, runners not properly aligned
There is no electricity
It is not plugged in
The motor has overheated
Problem setting the limit switch
Possibly broken belts, or disconnection from drive shaft
Dirty runners, runners not properly aligned
CORRADI S.P.A. - USER MANUAL - PERGOTENDA 45-60
CHECKS AND SOLUTIONS
Check the electric current
Check that the plug is correctly connected to a suitable socket
Wait 5-10 minutes to allow the motor to cool down. If the
problem persist check the limit switch
Change the remote battery
Call a qualified technician and replace the fuse.
Contact dealer
Clean the runners. Follow instructuion in chapter on
maintenance. Realign the runners
Check the electric current
Check that the plug is correctly connected to a suitable socket
Wait 5-10 minutes to allow the motor to cool down. If the
problem persist check the limit switch
Call a qualified technician and set the limit switch.
Contact dealer
Clean the runners. Follow instructuion in chapter on
maintenance. Realign the runners
7 - 04.2011