Eaton Powerware 9125 Installationsanleitung Seite 57

3. To prevent electrostatic discharge (ESD), place one hand on a metal
surface such as the UPS rear panel.
Align the Single-Port Card with the slot guides and slide the card
into the slot until it is firmly seated.
4. Secure the Single-Port Card with the screws removed in Step 1.
®
EATON Powerware 9125 (9910-P30) UPS Installation Guide for IBM
On-Bypass
Disabled
NORM
On-Bypass Relay Jumper
(J3)
Figure 42. On-Bypass Relay Jumper
®
Applications
COMMUNICATION
On-Bypass
Enabled
AS/400
S 43
164201636 Rev A