Activate/Deactivate Ir Leds; Start/Stop Recording - Conrad Electronic 75 15 54 Bedienungsanleitung

8. Activate/deactivate IR LEDs

If there is not enough light to ensure good recording quality, you can activate the IR
LEDs.
To activate the IR LEDs, press the "IR LEDs" button (3).
When the IR LEDs are active, the "IR LEDs" status LED glows green.
Please note that the image recordings are black and white when the
IR LEDs are active during darkness.

9. Start/stop recording

Please note that the surveillance camera automatically overwri-
tes previous recordings when the memory of the SD or MMC
card inserted is full.
When all memory is used up, recording pauses for two seconds.
a) Start recording:
To start recording, press the "REC" button (4) shortly. The "POWER" status LED
(14) lights up during image recording.
b) Stop recording:
To stop recording, press the "STOP" button (5) shortly. The current recording is
stored and the "POWER" status LED (14) goes out.
25