W 890 Flexio
3. Safety Instructions for Spray Guns
ATTENTION! EXPLOSION HAZARD!
Do not store flammable materials in the base device!
Only store materials in the basic device in containers that close airtight!
Remove any material that may have leaked into the basic device
immediately and allow the device to dry completely before using it! Do not
store materials contained solvents in the basic device during operation!
•
CAUTION! Wear breathing equipment: Paint mist and solvent vapors are
damaging to health. Always wear breathing equipment and only work in
well ventilated rooms or using supplementary ventilating equipment. It is
advisable to wear working clothing, safety glasses, ear protection and gloves.
CAUTION: Danger of injury! Never point the spray stream towards
Sockets and plugs must be masked. Risk of an electric shock as a
consequence of sprayed material entering the socket!
•
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents.
•
Caution against dangers that can arise from the sprayed substance and observe the
text and information on the containers or the specifications given by the substance
manufacturer.
•
Do not spray any liquid of unknown hazard potential.
•
The device may not be used in workplaces covered by the explosion-protection
regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or artificial
ventilation.
•
There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
•
Ensure that no solvent vapors are sucked in by the unit. Do not spray onto the unit!
•
The spray gun is not a toy; children must therefore not be allowed to handle it or play
with it.
•
Before working on the spray gun remove the power plug from the socket.
•
Cover areas that are not to be sprayed. When working keep in mind that wind, for example,
may transport paint mist over great distances and cause damage.
•
The units may only be used with a functional valve. If paints rises in the ventilating hose
(Fig. 1, item 19) do not operate the unit further! Dismantle and clean the ventilating
hose, valve and diaphragm and replace the diaphragm if necessary.
•
Do not lay the spray gun.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.
human beings or animals.
GB
25