Navigation Panel - ZyXEL NBG4115 Bedienungsanleitung

Chapter 3 The Web Configurator
Table 3 Web Configurator Status Screen (continued)
LABEL
- Memory Usage
System Setting
- Firewall
- Bandwidth
Management
- UPnP
Interface Status
Interface
Status
Rate
Summary
DHCP Table
Packet Statistics
WLAN Station Status

3.5.1 Navigation Panel

Use the sub-menus on the navigation panel to configure NBG4115 features.
The following table describes the sub-menus.
Table 4 Screens Summary
LINK
Status
Network
32
DESCRIPTION
This shows what percentage of the heap memory the NBG4115 is using.
This shows whether the firewall is active or not.
This shows whether bandwidth management is enabled or not.
This shows whether UPnP is active or not.
This displays the NBG4115 port types. The port types are: WAN, LAN and
WLAN.
For the 3G, LAN and WAN ports, this field displays Down (line is down) or
Up (line is up or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when
the WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A
when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're
using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to
trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP
encapsulation. This field displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN
is enabled and N/A when the WLAN is disabled.
Use this screen to view current DHCP client information.
Use this screen to view port status and packet specific statistics.
Use this screen to view the wireless stations that are currently associated
to the NBG4115.
TAB FUNCTION
This screen shows the NBG4115's general device,
system and interface status information. Use this
screen to access the wizard, and summary statistics
tables.
User's Guide