C) Connecting The Record-Player Earth; D) Connection Of The Voltage Supply - MC Crypt DJ-70 Bedienungsanleitung

Connection

c) Connecting the record-player earth

If your record player has its own earths (usually a thin, black cable with clamp-type socket), connect these to the GND
earth screw terminals (22). This helps to avoid buzzing and interference.

d) Connection of the Voltage Supply

The mixer and all connected devices have to be switched off.
Ensure that all the electrical connections and connection cables between the different devices
and any extension cables comply with the regulations and comply with the operating instructions.
• Connect the power supply cable to the mains connection AC INPUT (28) on the mixer.
• Connect the mains plug of the mains cable to a 230V~/50Hz mains socket with an earth contact.
Connection example:
AC 230V ~
FUSE 0.5A/250V
TO PREVENT ELECTRIC SHOCK , DO NOT
REMOVE COVER (OR BOTTOM SCREWS).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICING PERSONNEL.
WARNING : THIS APPLIANCE MUST BE EARTHED.
AMP
TAPE
PHONO
MASTER CH2
REC LN 4 PH 2/LN 3
AMP
L
R
LN 3
OUTPUT INPUT PH 2
PHONO
GND
CH1
PH 1/LN 1
LN 2
L
R
INPUT INPUT LN 1 PH 1
CD
CD
33