Indirect Measurement - TOOLCRAFT LDM 60J Bedienungsanleitung

20. Indirect measurement

• By applying the Pythagorean theorem (a
object can be determined indirectly.
• The number of required keystrokes refers to the status directly after
switching on the product.
• The starting point (measurement reference) must be at the same
location for each single measurement.
With two reference points
1. Press the indirect measurement button (H) twice. A rectangular
triangle appears left in the display.
2. Activate the target laser (B) by pressing the ON/DIST button (C).
3. Now measure both necessary distances. In regard to the right order,
refer to the following picture.
+b
2
1 2
1 2
m m
=c ), the height of an
2 2
m
m
51