Adding Readings; Subtracting Measurements - TOOLCRAFT LDM 60J Bedienungsanleitung

5. Repeat the same procedure starting from step 2, in order to perform
further measurements. Previous readings will be moved to the
respectively upper line.

12. Adding readings

1. Press the +/- button (G) twice. The plus symbol appears left in the
display.
2. Measure the distances to be added.
3. The total sum is shown in the lower line. The reading measured last
is shown in the line directly above the total sum.

13. Subtracting measurements

1. Measure the first value.
2. Press the +/- button (G). The minus symbol appears left in the
display. The just measured reading will be moved upwards.
1 2
1 2
2.387
m m
1 2
1 2
2.387 m
4.000 m
6.387
m m
45