Continuous - Konica Minolta Multi Gloss 268 Betriebsanleitung

You can use this function to perform
up to 99 measurements at an
adjustable measurement interval.
This is helpful when you are
covering large samples and you
want to evaluate the homogeneity of
the surface.
If you select this function, you will
first be asked to enter the time that
defines the interval. The longest
measurement interval possible is 9
seconds. A setting of 0 seconds
indicates the shortest interval
possible, one that is identical to the
duration of the measurement, which
is about 0.5 seconds per geometry.
To start a continuous measurement,
press the operate button (a note in
the display also tells you this). If you
would like to exit the continuous
measurement, press mode.
To start the measurement, press
operate. The unit now performs
measurements up to 99 times at the
set interval. Measurement values are
shown in the display after each
measurement. You can interrupt the
continuous measurement by
pressing the operate button (hold it
down briefly). The number of
measurements, the mean value, the
minimum and the maximum appear
in the display. Press the operate
button to continue with the
continuous measurement. To end
the measurement, press mode.

Continuous

9
29