Connection
Maintenance and Cleaning
Before cleaning the outside of the surveillance camera's casing, unplug it from the mains.
To clean the outside of the camera, it is sufficient to use a dry, soft and clean cloth. Do not use
any aggressive cleaning agents.
Disposal
Electrical and electronic products do not belong in the household waste!
Dispose of the product at the end of its service life in accordance with the
applicable statutory regulations.
Technical Data
Image sensor:
Operating voltage:
Current consumption:
Recommended power transformer:
TV lines horizontal:
Detection area, horizontal:
Detection area, vertical:
Camera lens:
Dimensions (Ø x D):
Weight:
Operating temperature:
Other features:
6.35 mm (1/4") CCD
12 V/DC
approx. 100 mA
12 V/DC, 300 mA
Plug polarity (inside=plus, outside=minus)
420
approx. 49°
approx. 36°
3.7 mm
approx. 30 x 22 mm
approx. 42 grams
-10°C to +50°C
AGC (Auto Gain Control), AWB (Auto White
Balance), AES (Auto Exposure System), BLC
(Backlight Compensation)
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2009 by Conrad Electronic SE.