Max/Min/Avg Recording Measurement; Manual Data Memory And Read Mode - Amprobe TMA-21HW Bedienungshandbuch

Wet bulb temperature calculated value (WET),
Dew point temperature calculated value (DEW),
Wind chill temperature calculated value (WCT),
Heat index temperature calculated value (HI),
Humidex temperature calculated value (HD).

MAX/MIN/AVG Recording Measurement

• Push "MX/MN" key to enter the recording mode, the " REC " symbol is
displayed and the auto power off function will be auto cancelled.
• Push "MX/MN" key to circulated the display of the maximum ( REC MAX
), minimum ( REC MIN), average ( REC AVG ) and current ( REC ) air
velocity and humidity reading via push "VEL %RH" key.
• Push " H HOLD" key to paused recording, the " H " symbol is displayed,
push " H HOLD" key again will resume recording.
• Push "MX/MN" key for 2 seconds to exit this mode.

Manual Data Memory and Read Mode

TEST ID 0 Memory Mode :
• Push "Test ID" key to select the "TEST ID 0" memory.
• Push "AUTO MEM" key each time, one set of reading to will be stored
to the memory. At this moment, display will show the " M " symbol one
time and the memory address number. Total memory size is 99 sets.
• Push "READ" key to enter READ mode, the display will show " R "
symbol and the memory address number. Push  or  key to select the
desired memory address number data for display.
• Push "READ" key for 2 seconds to exit this mode.
9