M) Setting The Display Unit For Temperature (°C/°F); N) Switching The 12/24H Display - Conrad TE635EL Bedienungsanleitung

m) Setting the display unit for temperature (°C/°F)
• If a time zone is shown ("ZONE" displayed above time), change to the normal time display
(e.g. 12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language
appears on the top right of the display instead of the running second. Release the button
again.
• By pressing the "MODE" button again briefly, the temperature display starts to flash now.
• You can select the desired temperature unit (°C or °F) with the " " and " " buttons on the
front of the weather station.
• Now press the "MODE" button (only press button briefly each time) so often until the normal
time display reappears (and no setting option flashes anymore).

n) Switching the 12/24h display

The time display can be switched between the 24 hour format and the 12 hour format with AM/
PM display.
• If a time zone is shown ("ZONE" displayed above time), change to the normal time display
(e.g. 12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language
appears on the top right of the display instead of the running second. Release the button
again.
• Briefly press the "MODE" button several times until "24Hr" (or "12Hr") starts to flash on the
top right of the display.
• You can select the desired display format with the " " and " " buttons on the front of the
weather station.
• Now press the "MODE" button (only press button briefly each time) so often until the normal
time display reappears (and no setting option flashes anymore).
75