N) Switching Between 12/24 Display; O) Switching Between Date Display Format - Conrad 64 61 09 Bedienungsanleitung

n) Switching between 12/24 display

The time display can be switched between the 24 hour format and the 12 hour format with AM/PM
display.
• If a time zone is shown ("ZONE" bottom left next to time), change to the normal time display (eg.
12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language appears on
the bottom right on the display.
• Briefly press the "MODE" button several times until "24Hr" (or "12Hr") starts to flash on the bottom
of the display.
• You can choose the desired display format with the "+" and "-" button on the right hand side of the
base station.
• Now press the "MODE" button until the normal time display reappears (and no setting option
flashes anymore).

o) Switching between date display format

When displaying the date you can choose between the day/month display and the month/day display.
• If a time zone is shown ("ZONE" bottom left next to time), change to the normal time display (eg.
12:15:05) by briefly pressing the "MODE" button several times.
• Press the "MODE" button (approx. 2 seconds) until the abbreviation of the language appears on
the bottom right on the display.
• Briefly press the "MODE" button several times until the date is shown on the bottom of the display
with a flashing "D" and a flashing "M".
• You can choose the desired display format with the "+" and "-" button on the right hand side of the
base station.
• Now press the "MODE" button until the normal time display reappears (and no setting option
flashes anymore).
72