Stop Recording - Golden Media Hypercube Bedienungsanleitung

7.2 Recording
7.2.1 Instant recording. Press the Record-Button. You
have five available options:
-Add recording (indefinitely)
-Add recording (stop after current event)
-Add recording (enter recording duration)
-Add recording (enter recording end time)
-Don't record
Use the up/down-Buttons to navigate to your desired selection
and press the OK-Button to select.
An ongoing recording is indicated by a flashing symbol in the info bar.
During the recording you can watch another service, view a previously recorded movie or add an additional
recording.
Press the Up/Down-Buttons on your remote control to activate the service list. The recording continues in the
background.
If all tuners are used for recording or by the Picture- in-Picture mode, and you are trying to access a service that
is not on one of the recorded transponders, you will get the "No free tuner" message.

7.2.2 Stop recording

Switch to the service of which recording you want to stop.
Press the Record-Button, select the "Stop recording" option and
press the OK-Button to select.
If you only have one active recording, it will be stopped
immediately.
If more than one recording is active, you will be given the choice
of which recording you want to stop.
7.2.3 Recording by timer
With the help of a timer you can record shows (if you have a hard disk installed). You are offered two different
ways to program a timer, the manual way of via the EPG.
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the
option "Timer" and press the OK-Button to select.
The "Timer" menu will be seen.
Pressing the red Options-Button will delete a timer. The green Options-Button adds a timer, the yellow
Options-Button toggles active on and off (only possible in waiting status) and the blue Options-Button removes
finished timers from the list.
21